+48 516 140 008 sklep@molynails.live Free and fast shipping from 22,46 €

Add products by adding codes

Add a CSV file
Enter the product codes that you want to add to the cart in bulk (after a comma, with a space or from a new line). Repeating the code many times will add this item as many times as it appears.

How to Apply MollyNails and MollyLac Regular Nail Polish – A Practical Step-by-Step Guide

How to Apply MollyNails and MollyLac Regular Nail Polish – A Practical Step-by-Step Guide

Working with regular nail polish is different from applying gel polish. The key is patience and applying thin coats.

These two factors make all the difference to the longevity, shine and overall appearance of your manicure.

Step 1. Prepare the nails

Prepare the nails as you would for a traditional manicure:

  • Push back and tidy the cuticles.
  • File the nails into the desired shape.
  • Gently buff the nail surface if needed.
  • Remove any dust and degrease the nail plate using IZOTON.

Next, apply a base coat to improve polish adhesion and protect the natural nail.

Allow the base coat to dry completely.

Step 2. Apply the colour

This is the most important part of the entire manicure.

Remember: Always apply very thin coats.

Regular nail polish dries as its solvents evaporate. The thicker the coat, the longer it takes to dry.

Thin coats mean faster drying and better wear.

Most shades achieve full coverage with two thin coats.

Step 3. Allow each coat to dry

Don't rush. Before applying another coat, allow the colour to dry. Drying time depends on how thickly the polish has been applied, but it usually takes between 2 and 5 minutes.

If the first coat is too thick, the second coat can trap solvents underneath, significantly extending the drying time of the entire manicure.

Close-up of a classic nude manicure being applied

Step 4. Apply a second thin coat

Keep the second coat just as thin as the first. Don't try to achieve full coverage with one thick coat. Two thin coats will give you a better result than one thick application. Once again, allow the polish to dry thoroughly.

When can you apply the top coat?

Applying a top coat too early is one of the most common mistakes. Only apply the top coat once the colour is completely dry. In most cases, you should wait around 5 minutes, or up to 8 minutes if the coats are thicker.

How can you tell if the polish is dry?

There's a simple way to check. Gently glide the top coat brush over the nail surface. If colour transfers onto the brush, the polish is still wet. If the brush stays clean, you can proceed with the top coat.

How to Apply MollyNails Diamond Top

Diamond Top has been specially developed for regular nail polish.

It contains:

  • Acetone derivatives.
  • A photoinitiator.

That's why it comes in a purple bottle, which helps protect the ingredients from UV exposure.

Important: Diamond Top must not be applied over wet nail polish.

If the colour hasn't dried properly, the top coat may dissolve its surface, causing streaks or dragging the polish.

The Most Common Mistake When Switching from Gel Polish

Nail technicians who are used to working with gel polish often instinctively press the brush firmly against the nail. With regular nail polish, this can cause problems. Applying too much pressure may cause the brush to lift or drag away colour that hasn't fully dried.

Instead:

  • Use a light touch.
  • Glide the brush over the nail with minimal pressure.
  • Let the polish and top coat flow smoothly across the nail surface.

Think of it as letting the brush float just above the nail rather than pressing it against the surface.

The Key Differences Between Regular Nail Polish and Gel Polish

Regular nail polish:

  • Does not require curing under a lamp.
  • Does not self-level in the same way as gel polish.
  • Needs time for each coat to dry.

Don't try to apply it using the same technique as gel polish. These are two completely different nail systems.

MollyNails Expert Tip

When opening a new bottle of Diamond Top, unscrew the cap and leave the bottle open for approximately 5 minutes before its first use.

Allowing a small amount of solvent to evaporate will slightly thicken the top coat, making it easier to control during application. With subsequent uses, this is usually no longer necessary, as the product naturally develops a more gel-like consistency, making application more comfortable.

The Golden Rules of Applying Regular Nail Polish

  1. Always apply thin coats.
  2. Don't rush between steps.
  3. Allow each coat to dry thoroughly.
  4. Only apply Diamond Top over completely dry colour.
  5. Use minimal brush pressure.
  6. Don't treat regular nail polish like gel polish – they are two different manicure systems.

Remember: A long-lasting, beautifully glossy regular manicure isn't about applying thicker coats. It's about using the right technique, being patient and allowing enough drying time between applications.

Anna Karolak
MollyNails Editorial Team

Anna Karolak

Marketing Director and author of educational content covering nail styling, products and professional techniques used at every stage of a manicure. She combines many years of experience in the beauty industry with a practical approach to education and brand communication.

Meet the Author →
Real customers reviews
4.9 / 5.0 92 reviews
pixel